Clutch „A - Audi A8 Workshop Manual

2005 year; 2003 year
Hide thumbs Also See for A8:
Table of Contents

Advertisement

3.7
Clutch „A"
1 - Cylinder „A"
❑ Checking running surfa‐
ces for wear
⇒ page 175
4 - Piston „A"
❑ Check for wear
10 - Outer plate
❑ Checking for wear
⇒ page 176
11 - Friction plate
❑ Checking for wear
⇒ page 176
Checking running surfaces for wear
– Check running surfaces -arrows- on inside of cylinder „A" for
wear.
The running surface should not have any deep scoring and/or
blue discoloration.
If there are deep scores and/or blue discolouring:
– Renew cylinder „A".
Proceed as follows if the running surface has no blue discolora‐
tion and there are only slight scores:
– Rub down running surface one or two times with abrasive pa‐
per and oil (grain size 600).
– Clean running surface thoroughly with clean cloth and check
running surface.
The running surface should now be in as-new condition.
If scoring is still present after this step:
– Renew cylinder „A".
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A6 2005 ➤ , Audi A8 2003 ➤
3. Assessment of wear on gearbox components
175

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A6

Table of Contents