Audi A8 Workshop Manual page 33

– Screw threaded spindle -1- of lifting device -T10272- into tap‐
ped hole of body „I" as far as stop.
– Secure components of body „I" to prevent them being pulled
apart (by screwing sleeve -2- all the way down on threaded
spindle by hand).
– Connect eye of lifting device -T10272- to workshop hoist -VAS
6100- by means of shackle -10-222 A/12- .
– Lift body „I" out of gearbox housing using workshop hoist -VAS
6100- .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Place body „I" on support -T40118- .
– Detach lifting device -T10272- from body „I" by releasing
sleeve -2- and unscrewing threaded spindle -1-.
– Detach clutch „C/D" -item 2- from planetary drive „II" and „III"
-item 1-.
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
Audi A6 2005 ➤ , Audi A8 2003 ➤
2. Dismantling and assembling planetary gearbox
29