Audi A8 Workshop Manual page 57

If result does not match specification:
– Select required new circlip -1- according to following table.
Note
-Item 2- can be disregarded.
• If clearance is below specification: insert thinner circlip of ap‐
propriate thickness.
• If clearance is above specification: insert thicker circlip of ap‐
propriate thickness.
Available circlips - Thickness of circlips in mm
2.20
2.40
2.60
2.80
3.00
– Check clearance again after inserting circlip.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
3.20 4.20
3.40 4.40
3.60 4.60
3.80
4.00
Audi A6 2005 ➤ , Audi A8 2003 ➤
3. Dismantling and assembling body „I"
53