Servicing Transfer Box; Permitted Unless Authorised By Audi Ag. Audi Ag Does Not Guarantee Or Accept Any Liability; With Respect To The Correctness Of Information In This Document. Copyright By Audi Ag - Audi A8 Workshop Manual

2

Servicing transfer box

Overview
♦ ⇒ „2.1 Exploded view - centre differential", page 157
♦ ⇒ „2.2 Removing and installing centre differential housing with
gearbox removed", page 158
♦ ⇒ „2.3 Renewing ball bearing for self-locking centre differen‐
tial", page 160
♦ ⇒ „2.4 Renewing oil seal for flange shaft (rear)", page 161
2.1 Exploded view - centre differential
Caution
Risk of damage to gearbox
♦ Do not run the engine or tow the vehicle if the centre dif‐
ferential has been removed or if the gear oil has been
drained.
1 - Circlip
❑ For ball bearing for
flange shaft
2 - Circlip
❑ For flange shaft
3 - Ball bearing
❑ For flange shaft (rear)
❑ ⇒ „2.3 Renewing ball
bearing for self-locking
centre differential",
page 160
4 - O-ring
❑ Renew
❑ Lubricate with gear oil
❑ On centre differential
housing
5 - Centre differential housing
❑ Removing and installing
centre differential hous‐
ing with gearbox in vehi‐
cle ⇒ Automatic gear‐
box 09E, four-wheel
drive; Rep. gr. 39
❑ ⇒ „2.2 Removing and in‐
stalling centre differen‐
tial housing with gear‐
box removed",
page 158
6 - Oil seal for flange shaft
(rear)
❑ ⇒ „2.4 Renewing oil seal
for flange shaft (rear)",
page 161
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not

permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability

with respect to the correctness of information in this document. Copyright by AUDI AG.

Audi A6 2005 ➤ , Audi A8 2003 ➤
2. Servicing transfer box
157