Atf Supply Unit - Audi A8 Workshop Manual

Audi A6 2005 ➤ , Audi A8 2003 ➤
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
3.9

ATF supply unit

3 - Needle bearing
❑ Perform visual check for
damage: needle bear‐
ing should be in as-new
condition; renew if nec‐
essary
5 - ATF pump housing
❑ Check running surfaces
for scoring and signs of
abnormal wear
⇒ page 178
6 - Annulus
❑ Check running surfaces
for scoring and signs of
abnormal wear
⇒ page 178
❑ Check drive lugs in
pump gear ⇒ page 179
7 - ATF pump gear
❑ Check running surfaces
for scoring and signs of
abnormal wear
⇒ page 178
13 - Stator shaft
❑ Check brass bushes for
wear ⇒ page 179
❑ Check splines for wear
❑ Component part of ATF
supply unit; cannot be
renewed separately
15 - Rectangular section seals
❑ Checking for wear
⇒ page 179
Checking components of ATF pump for scoring and signs of wear
– Check running surfaces of following components for scoring
and signs of wear:
2 - ATF pump housing
3 - Annulus
4 - ATF pump gear
• The running surfaces should have either a dull or bright finish
and should be free of even the slightest trace of scoring.
Note
Very slight scoring can be smoothed down with an oilstone.
♦
A defective ATF pump causes delays in power transmission
♦
and gear changes.
178
Rep. gr.39 - Final drive - front differential
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.