Advertisement
Thermo Fisher Scientific
IP Address
The IP Address screen is used to edit the IP address. The IP address can
only be changed when DHCP is OFF. For more information on DHCP,
see "Use DHCP" above.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > TCP/IP Settings > IP Address.
Netmask
The Netmask screen is used to edit the netmask. The netmask is used to
determine the subnet for which the instrument can directly communicate
to other devices on. The netmask can only be changed when DHCP is
OFF. For more information on DHCP, see
In the Main Menu, choose Instrument Controls > Communication
●
Settings > TCP/IP Settings > Netmask.
DHCP:
CURRENTLY:
SET TO:
TOGGLE VALUE
CYCLE POWER TO CHANGE DHCP
RANGE
AVG
DIAGS ALARM
IP ADDRESS:
CURRENT: 10.209.43.237
SET TO: 10.209.43.237 1
MOVE CURSOR
CHANGE VALUE
SAVE VALUE
RANGE
AVG
DIAGS ALARM
NETMASK:
CURRENT: 255.255.254.0
SET TO: 255.255.254.0 0
MOVE CURSOR
CHANGE VALUE
SAVE VALUE
RANGE
AVG
DIAGS ALARM
Instrument Controls Menu
OFF
ON ?
"Use
DHCP" above.
Model 42i Trace Level Instruction Manual
Operation
3-41
Advertisement
Troubleshooting
