Advertisement
Operation
Diagnostics Menu
Set Analog Outputs
Instrument
Configuration
Contact Information
3-62
Model 42i Trace Level Instruction Manual
The Set Analog Outputs screen contains three choices: Set to full-scale, set
to zero, or reset to normal. Full-scale sets the analog outputs to the full-
scale voltage, zero sets the analog outputs to 0 volts, and normal operation.
The example below shows the selected output state "ALL" is set to normal.
In the Main Menu, choose Diagnostics > Test Analog Outputs > ALL,
●
Voltage Channel 1-6, or Current Channel 1-6.
SET ANALOG OUTPUTS:
SETTING:
OUTPUT SET TO:
SET TO FULL SCALE
SET TO ZERO
RESET TO NORMAL
RANGE
AVG
The Instrument Configuration screen displays information on the
hardware configuration of the instrument.
Note If the analyzer is in service mode, pressing
toggle it yes or no (with the exception of purchased options such as
dilution and auto calibration).
In the Main Menu, choose Diagnostics > Instrument Configuration.
●
INSTRUMENT CONFIGURATION:
>I/O EXPANSION BOARD
ZERO/SPAN VALVES
LAG VOLUME
PERM DRYER
CONVERTER
DILUTION
AUTO CALIBRATION
RANGE
AVG
The Contact Information screen displays the customer service information.
In the Main Menu, choose Diagnostics > Contact Information.
●
ALL
NORMAL
DIAGS ALARM
▲
YES
YES
NO
NO
MOLY
NO
NO
DIAGS ALARM
on the item will
Thermo Fisher Scientific
Advertisement
Troubleshooting
