Temperature Calibration; Analog Output Calibration - Thermo Scientific 42i Instruction Manual

Temperature
Calibration
Analog Output
Calibration
Thermo Fisher Scientific
INPUT BOARD CALIBRATION:
TO CALIBRATE
** WARNING **
CONCENTRATION
xx IS HALTED
THIS SCREEN!
RANGE AVG DIAGS ALARM
The Temperature calibration screen allows the user to view and set the
ambient temperature sensor calibration. The temperature calibration is
visible only when the instrument is in service mode. For more information
on the service mode, see
Note This adjustment should only be performed by an instrument service
technician.
In the Main Menu, choose Service > Temperature Calibration.
●
The Analog Output Calibration menu is a selection of 6 voltage channels
and 6 current channels (if I/O expansion board option is installed) to
calibrate, and allows the user to select the calibration action zero or span.
The analog output calibration is visible only when the instrument is in
service mode. For more information on the service mode, see
Mode" earlier in the chapter.
Note This adjustment should only be performed by an instrument service
technician.
In the Main Menu, choose Service > Analog Out Calibration.
●
CALCULATIONx
INSIDEXX XX
XX
"Service
▲
CALIBRATE AMBIENT TEMP:
CURRENTLY:
SET TO:
MOVE CURSOR
CHANGE VALUE
RANGE AVG DIAGS ALARM
▲
INPUT GAIN TEST:
GAIN = 1
TEST = OFF
FREQ = 5000
CHG GAIN
RANGE AVG DIAGS ALARM
Mode" earlier in the chapter.
o
32.3 C
o
032.5 C ?
SAVE
Model 42i Trace Level Instruction Manual
Operation
Service Menu
TEST MODE
"Service
3-81