Table B-7. Contrast Levels - Thermo Scientific 42i Instruction Manual

Thermo Fisher Scientific
Send: contrast
Receive: contrast 5:50%
set contrast level
This command sets the screen's level of contrast, according to
The example below sets the contrast level to 50%.
Send: set contrast 5
Receive: set contrast 5 ok
Table B–7. Contrast Levels
Level Contrast Level
0 0%
1 10%
2 20%
3 30%
4 40%
5 50%
6 60%
7 70%
8 80%
9 90%
10 100%
conv set temp
This command reports the temperature that the NO
The example below reports that the converter temperature is set to 325 °C.
Send: conv set temp
Receive: conv set temp 325 deg C
set conv set temp value
This command sets the temperature that the NO
value is an integer representing dwgrees C. The example below sets the
converter temperature to 325 °C.
Send: set conv set temp
Receive: set conv set temp 325 deg C ok
date
This command reports the current date. The example below reports the
date as December 1, 2004.
C-Link Protocol Commands
Hardware Configuration
Table
converter is set to.
2
converter is set to, where
2
Model 42i Trace Level Instruction Manual
B–7.
B-35