Operation
Service Menu
Range Mode Select
Converter Set
Temperature
3-74
Model 42i Trace Level Instruction Manual
SET PMT VOLTAGE:
SET PMT:
COUNTS:
RANGE
AVG
The Range Mode Select screen is used to switch between the various range
modes: single, dual, and auto range.
In the Main Menu, choose Service > Range Mode Select.
●
RANGE MODE SELECT:
CURRENTLY:
SET TO:
RANGE
AVG
The Converter Set Temperature screen is used to change the converter set
temperature. The converter set temperature reading is updated every
second. The converter set temperature screen is visible only when the
instrument is in service mode. For more information on the service mode,
see "Service Mode" earlier in the chapter.
Note This adjustment should only be performed by an instrument service
technician.
▲
In the Main Menu, choose Service > Converter Set Temperature.
●
-750.0 V
2254 ?
CHANGE VALUE
SAVE VALUE
DIAGS ALARM
SINGLE
DUAL ?
CHANGE VALUE
SAVE VALUE
DIAGS ALARM
Thermo Fisher Scientific