Output Relay Settings - Thermo Scientific 42i Instruction Manual

Output Relay Settings

Instrument State
Thermo Fisher Scientific
The Output Relay Settings menu displays a list of the 10 digital output
relays available, and allows the user to select the logic state or instrument
parameter for the relay selected.
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Output Relay Settings.
Logic State
The Logic State screen is used to change the I/O relay to either normally
open or normally closed.
Press
●
The Instrument State submenu allows the user to select the instrument
state that is tied to the selected relay output. A submenu lists signal types of
either alarm or non-alarm to choose from.
I/O CONFIGURATION:
>OUTPUT RELAY SETTINGS
DIGITAL INPUT SETTINGS
ANALOG OUTPUT CONFIG
ANALOG INPUT CONFIG
RANGE AVG DIAGS ALARM
OUTPUT RELAY SETTINGS:
>1 NOP
2 NOP
3 NOP
4 NOP
5 NOP
6 NOP
7 NOP
RANGE AVG DIAGS ALARM
to toggle and set the logic state open or closed.
OUTPUT RELAY SETUP:
>LOGIC STATE
INSTRUMENT STATE
RANGE AVG DIAGS ALARM
GEN ALARM
NONE
UNITS
CONC ALARM
NONE
NONE
NO MODE
OPEN
Model 42i Trace Level Instruction Manual
Operation
Instrument Controls Menu
3-43