Thermo Scientific 42i Instruction Manual page 293

Thermo Fisher Scientific
D to A Function
11 Current Output
12 Current Output
list var aout
list var dout
list var din
These commands report the list of index numbers, and the variables
(associated with that index number) available for selection in the current
mode (determined by single/dual/auto, gas mode) for analog output, digital
output and digital inputs. The index number is used to insert the variable
in a field location in a list using "set sp field index". The example below
reports the list of analog output, index numbers, and variables.
Send: list var aout
Receive: list var aout
index variable
0 none
1 no
2 no2
3 nox
18 intt
19 rctt
20 pmtt
21 convt
25 pres
26 smplf
27 pmtv
28 ain1
29 ain2
30 ain3
31 ain4
32 ain5
33 ain6
34 ain7
35 ain8
relay stat
This command reports the current relay logic normally "open" or normally
"closed," if all the relays are set to same state, that is all open or all closed.
The example below shows that the status when all the relays logic is set to
normally "open".
Send: relay stat
Receive: relay stat open
Single Range Dual Range
Not Used Low NO
2
Not Used Low NO
x
Model 42i Trace Level Instruction Manual
C-Link Protocol Commands
I/O Configuration
Auto Range
Not Used
Not Used
B-45