Advertisement
Operation
Instrument Controls Menu
Instrument Action
Analog Output
Configuration
3-46
Model 42i Trace Level Instruction Manual
and closes to trigger the digital input action. If nothing is connected to the
digital input pin, the state should be left at open to prevent the action from
being triggered.
Press
to toggle and set the logic state open or closed.
●
DIGITAL INPUT SETUP:
>LOGIC STATE
INSTRUMENT STATE
RANGE
AVG
The Instrument Action screen allows the user to choose the instrument
action that is tied to the selected digital input.
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Digital Input Settings > Select Relay > Instrument Action.
CHOOSE ACTION:
>NONE
ZERO MODE
SPAN MODE
NO MODE
NOX MODE
SET BACKGROUND
CAL TO LO SPAN
RANGE
AVG
AOUTS TO ZERO
AOUTS TO FS
CAL TO HI SPAN
The Analog Output Configuration menu displays a list of the analog
output channels available for configuration. Channel choices include all
voltage channels, all current channels, voltage channels 1-6, and current
channels 1-6 (if the I/O expansion board option is installed). Configuration
choices include selecting range, setting minimum/maximum values, and
choosing signal to output.
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Analog Output Config.
OPEN
DIAGS ALARM
<--
DIAGS ALARM
Thermo Fisher Scientific
Advertisement
Troubleshooting
