Measurements - Thermo Scientific 42i Instruction Manual

Measurements

Thermo Fisher Scientific
Command Description
sc (screen) C-series legacy command that reports a generic response
(Use iscreen instead)
sp field Reports/sets item number and name in scratch pad list
span Sets zero/span valves to span mode
span gas Sets zero/span valves to span gas mode
sr Reports last short record stored
srec Reports maximum number of short records
srec format Reports/sets output format for short records (ASCII or binary)
srec layout Reports current layout of short record data
srec mem size Reports maximum number of short records
srec per Reports/sets short record logging period
stream per Reports/sets current set time interval for streaming data
stream time Reports/sets a time stamp to streaming data or not
temp comp Reports/sets temperature compensation on or off
time Reports/sets current time (24-hour time)
up Simulates pressing up pushbutton
zero Sets zero/span valves to zero mode
zero gas Sets zero/span valves to zero gas mode
avg time
high avg time
low avg time
These commands report the averaging time in seconds when operating in
single range, or averaging time used with the high and low ranges when
operating in dual or auto range mode. The example below shows that the
averaging time is 300 seconds, according to
Send: avg time
Receive: avg time 12:300 sec
set avg time selection
set high avg time selection
set low avg time selection
C-Link Protocol Commands
Table B–2.
Model 42i Trace Level Instruction Manual
Measurements
Page
B-30
B-24
B-33
B-33
B-19
B-20
B-21
B-22
B-22
B-23
B-25
B-25
B-34
B-37
B-29
B-33
B-33
B-9