Streaming Data Interval; Concentrations - Thermo Scientific 42i Instruction Manual

Operation
Instrument Controls Menu

Streaming Data Interval

Concentrations

3-38 Model 42i Trace Level Instruction Manual
CHOOSE STREAM DATA:
>CONCENTRATIONS
OTHER MEASUREMENTS
ANALOG INPUTS
RANGE AVG
The Streaming Data Interval screen is used to adjust the streaming data
interval. The following interval times are available: 1, 2, 5, 10, 20, 30, 60,
90, 120, 180, 240, and 300 seconds.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Streaming Data Config > Streaming Data Interval.
STREAMING DATA INTERVAL:
CURRENTLY:
SET TO:
RANGE AVG
The Concentrations screen allows the user to select the output signal that is
tied to the selected streaming data item. The selected item is shown by
"<--" after it. In dual or auto range mode, "HI" or "LO" is displayed to
indicate high or low concentrations. Range (NO
range mode
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Streaming Data Config > Select Item > Concentrations.
CONCENTRATIONS:
>NONE
NO
NO2
NOx
RANGE (NOX)
PREREACTOR
RANGE AVG
DIAGS ALARM
10 SEC
20 SEC ?
CHANGE VALUE
SAVE VALUE
DIAGS ALARM
) is visible only in auto
x
<--
DIAGS ALARM
Thermo Fisher Scientific