Advertisement
Alarms Menu
Thermo Fisher Scientific
CONTACT INFORMATION:
CALL CENTER: 508-520-0430
WEB:
RANGE
AVG
The alarms menu displays a list of items that are monitored by the analyzer.
If the item being monitored goes outside the lower or upper limit, the
status of that item will go from "OK" to either "LOW" or "HIGH",
respectively. If the alarm is not a level alarm, the status will go from "OK"
to "FAIL". The number of alarms detected is displayed to indicate how
many alarms have occurred. If no alarms are detected, the number zero is
displayed.
To see the actual reading of an item and its minimum and maximum
limits, move the cursor to the item and press
Items displayed are determined by the options installed. The zero/span
check and auto calibration screens are visible only if the zero/span check or
auto calibration options are enabled. The motherboard status, interface
board status, and I/O Expansion board status (if installed) indicate that the
power supplies are working and connections are successful. There are no
setting screens for these alarms.
In the Main Menu, choose Alarms.
●
ALARMS:
ALARMS DETECTED
>INTERNAL TEMP
CHAMBER TEMP
COOLER TEMP
CONVERTER TEMP
PRESSURE
FLOW
RANGE
AVG
OZONATOR FLOW
ZERO CHECK
SPAN CHECK
ZERO AUTOCAL
SPAN AUTOCAL
NO CONCENTRATION
NO2 CONCENTRATION
NOx CONCENTRATION
ZERO CONCENTRATION
MOTHERBOARD STATUS
WWW.THERMO.COM
DIAGS ALARM
0
OK
OK
OK
OK
OK
OK
DIAGS ALARM
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Model 42i Trace Level Instruction Manual
Operation
Alarms Menu
.
3-63
Advertisement
Troubleshooting
