Advertisement
C-Link Protocol Commands
Hardware Configuration
B-36
Model 42i Trace Level Instruction Manual
Send:
date
Receive:
date 12-01-04
set date mm-dd-yy
mm = month
dd = day
yy = year
This command sets the date of the analyzer's internal clock. The example
below sets the date to December 1, 2004.
Send:
set date 12-01-04
Receive:
set date 12-01-04 ok
set default params
This command sets all the parameters to their default values. This does not
affect the factory-calibrated parameters.
Send:
set default params
Receive:
set default params ok
ozonator
This command reports the ozonator is on or off. The example below
reports that the ozonator is on.
Send:
ozonator
Receive:
ozonator on
set ozonator onoff
These commands set the ozonator on or off. The example below sets the
ozonator off.
Send:
set ozonator off
Receive:
set ozonator off ok
ozonator flow
This command reports the current ozonator flow. The example below
reports that the current ozonator flow is 0.010 LPM.
Send:
ozonator flow
Receive:
ozonator flow 0.050 l/m
ozonator safety
This command reports the status of the ozonator safety on or off. The
example below reports that the ozonator safety is on.
Send:
ozonator safety
Receive:
ozonator safety on
Thermo Fisher Scientific
Advertisement
Troubleshooting
