Field Service Ver. 2.0 Jan. 2008
2.3.21
Finisher control board (FSCB)
1. Remove the rear cover.
See P.8
[1]
[3]
2.3.22
Punch control board (PKCB)
2.3.23
Transport motor unit
1. Remove the rear cover.
See P.8
[4]
[4]
[2]
[2]
A0D6F2C571DA
[2]
[1]
A0D6F2C572DA
[4]
[1]
[5]
[3]
A0D6F2C573DA
2. Disconnect all connectors on the
board, and remove the screw [1].
3. Release the PCB support [2], and
remove the finisher control board [3].
1. Remove two screws [1].
2. Disconnect all connectors, and
remove the punch control board [2].
2. Disconnect the connector [1].
3. Remove screw [2], and remove the
harness guide [3].
4. Remove three screws [4], and
remove the transport motor unit [5].
2. Other
31