Editing Or Deleting A Level - Teledyne T700 Operation Manual

Teledyne API – Model T700 Dynamic Dilution Calibrator

4.11.5.5. Editing or Deleting a LEVEL

Make sure that the T700 is
in standby mode.
SETUP X.X DELETEL STEP?
YES NO
SETUP X.X 7) DURATION : 10.0 MIN
PREV NEXT INS
06873B DCN6388
To edit or delete an existing LEVEL, press:
STANDBY A-CAL=0.000 LPM
<TST TST> GEN STBY SEQ
SETUP X.X PRIMARY SETUP MENU
LVL GAS SEQ CFG
SETUP X.X [LEVEL ID] ) [Gas/Conc.], [Status Block Set]
PREV NEXT INS
Continue pressing NEXT or PREV until until
LEVEL to be edited or deleted appears
SETUP X.X 7) PURGE
PREV NEXT INS
DEL EDIT EXIT
Overview of Operating Modes and Basic Operation
SETUP
CLK PASS MORE EXIT
DEL EDIT PRNT EXIT
DEL EDIT EXIT
Toggle these buttons
select the parameter
to be edited
Level ID Number
Action
Status Block 1
Status Block 2
SETUP X.X LEVEL NUMBER:12
<SET SET> EDIT
Press EDIT then follow the instructions for the
parameter (See Sections 6.11.3 through 6.11.5.4
and 6.11.6).
EXIT
173