Trigger Level - Teledyne T3DSO1000A Series User Manual

Trigger Level

Trigger level and slope define the trigger point
Positive Slope
Negative Slope
Trigger Level
Trigger Point Trigger Point
Input Signal
You can adjust the trigger level for a selected analog channel by turning the Trigger Level
Knob.
You can push the Trigger Level Knob to set the level to 50% of the waveform's value
immediately. If AC coupling is used, pushing the Trigger Level knob sets the trigger level
to about 0 V.
The position of the trigger level for the analog channel is indicated by the trigger level icon
(if the analog channel is on) at the left side of the display. The value of the analog
channel trigger level is displayed in the upper- right corner of the display.
56 User Manual