Removing Top Cover - NEC EXP805 User Manual

Chapter 2 Preparations
1.5

Removing Top Cover

Remove Top Cover when installing or removing the optional component or change internal cable connection.
Please have ready a hexalobular driver (T-10) or flathead driver.
See steps 1 to 5 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
Unscrew the security screw with the hexalobular driver or flathead driver.
Unlock the hood latch on the top by pressing from behind and raise the hood latch.
Slide the cover a little bit to the rear side of the chassis.
Lift Top Cover and remove it from the server.
56
(5)
Hood latch
Express5800/R120h-2M (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
Close
Open
Security screw
(4) Security screw (1)
(3)
(2)