Table of Contents
Advertisement
Chapter 2 Preparations
1.6
Removing Top Cover
You need to remove top cover when installing or removing the following component:
Optical disk drive,
DIMM,
TPM module,
Additional HDD cage,
RAID Controller,
1.
See steps 1 to 5 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Slide Top Cover (front) toward the front of the server while pressing Release Button on the cover.
Remove screws from the top cover (front) and the top cover (rear).
3.
Lift off the top cover (front) from the server.
4.
Loosen the thumb nut on rear panel of the server, and slide the top cover (rear) toward the rear of the
server.
5.
Lift off the top cover (rear), and remove it from the server.
LAN riser card,
processor,
Internal Flash Memory,
PCI card,
Battery for RAID Controller
Express5800/R120e-2M User's Guide
1. Installing Internal Optional Devices
53
Advertisement
Table of Contents
