Top Cover; Removing Top Cover; Installing Top Cover - NEC Express5800 Series User Manual

Chapter 2 Preparations
1.5

Top Cover

Remove Top Cover when installing or removing the optional component or change internal cable connection.
 Hexalobular driver (T-10) or flathead driver
1.5.1

Removing Top Cover

1. See steps 1 to 5 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Unscrew the security screw with the hexalobular driver or flathead driver.
3. Unlock the latches on the top by pressing from behind and open the lever on the back.
4. Slide the cover a little bit to the rear side of the chassis.
5. Lift Top Cover and remove it from the server.
1.5.2

Installing Top Cover

For installing the top cover, reverse procedure to removing the top cover.
Security Screw
Express5800/R120h-2E User's Guide
1. Installing Internal Optional Devices
53