D-Link UWS User Manual
Ping Test
Use the Ping page to tell the switch to send a Ping request to a specified IP address. You can use this feature
to check whether the switch can communicate with a particular network host.
To access the Ping page, click LAN > Administration > Ping Test in the navigation menu.
Field
Hostname/IP Address
Count
Interval
Size
Ping
• Click Submit to send the ping. If successful, the results display as shown in
D-Link
Oct. 2015
Figure 28: Ping
Table 23: Ping Fields
Description
Enter the IP address or the host name of the station you want the switch to
ping. The initial value is blank. This information is not retained across a power
cycle.
Specify the number of pings to send.
Specify the number of seconds between pings sent.
Specify the size of the ping packet to send.
Displays the results of the ping.
Figure
29.
Unified Wired and Wireless Access System
Ping Test
Page 95