D-Link UWS User Manual
Configuring DNS
You can use these pages to configure information about DNS servers the network uses and how the switch/
router operates as a DNS client.
Global Configuration
Use this page to configure global DNS settings and to view DNS client status information.
To access this page, click LAN > Administration > DNS Client > Global Configuration.
Field
Admin Mode
Default Domain Name
Retry Number
Response Timeout
Domain List
• If you change any settings, click Submit to send the information to the router.
D-Link
Oct. 2015
Figure 66: DNS Global Configuration
Table 58: DNS Global Configuration Fields
Description
Select Enable or Disable from the pulldown menu to set the administrative
status of DNS Client. The default is Disable.
Enter the default domain name for DNS client messages. The name should be
no longer than 255 characters. When the system is performing a lookup on an
unqualified hostname, this field is provided as the domain name (e.g., if
default domain name is .com and the user enters hotmail, then hotmail is
changed to hotmail.com to resolve the name).
By default, no default domain name is configured in the system.
Enter the number of times to retry sending DNS queries. The valid values are
from 0 to 100. The default value is 2.
Enter the number of seconds to allow a DNS server to respond to a request
before issuing a retry. Valid values are 0 to 3600. The default value is 3.
Enter a domain list to define the domain to use when performing a lookup on
an unqualified hostname. Each name must be no more than 256 characters.
Multiple default domain names can be configured using the default domain-
name list.
If there is no domain list, the default domain name configured is used.
Configuring DNS
Unified Wired and Wireless Access System
Page 145