D-Link DWL-8600AP User Manual page 692

D-Link UWS User Manual
8. Configure the third VAP.
Note: Because this VAP uses WPA Enterprise, wireless clients must authenticate by using an
external RADIUS server. Make sure that the RADIUS Authentication Server Configured field shows
the status as Configured. For more information about configuring the RADIUS server, see the steps
that pertain to setting up the RADIUS server in
page 688.
a. Delete the existing SSID and enter Voice in the SSID field.
b. In the VLAN field, enter 30.
c. From the Security option, select WPA.
Additional security fields appear.
d. Clear the WPA option so that only WPA2 clients can connect to the VAP.
e. Select WPA Enterprise
f. Select the CCMP (AES) option.
g. From the L2 Distributed Tunneling Mode field, select Enable to allow the clients to roam among APs in
different subnets without losing their network connection.
h. From the DiffServ Policy UP field, select the policy to apply to traffic transmitted from wireless clients
to the AP.
i. Click Submit.
D-Link
Oct. 2015
Configuring a Virtual Access Point
"Configuring 802.1X Network Access Control" on
Unified Wired and Wireless Access System
Page 692