System Description; Figure 7: System Description; Table 3: System Description Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

System Description

After a successful login, the System Description page displays. Use this page to configure and view general
device information.
To display the System Description page, click LAN > Administration > System Description in the navigation
tree.
Field
System Description
System Name
System Location
System Contact
IP Address
System Object ID
System Time (yyyy-
mm-dd h:m:s)
System Up Time
Current SNTP
Synchronized Time
D-Link
Oct. 2015

Figure 7: System Description

Table 3: System Description Fields

Description
The product name of this switch.
Enter the name you want to use to identify this switch. You may use up to 31 alpha-
numeric characters. The factory default is blank.
Enter the location of this switch. You may use up to 31 alpha-numeric characters. The
factory default is blank.
Enter the contact person for this switch. You may use up to 31 alpha-numeric
characters. The factory default is blank.
The IP Address assigned to the network interface. To change the IP address, see
"Serial Port" on page 73.
The base object ID for the switch's enterprise MIB.
Enter the current date and time that the switch will follow using the on-board real-
time clock.
Displays the number of days, hours, and minutes since the last system restart.
Displays currently synchronized SNTP time in UTC. If no SNTP server has been
configured and the time is not synchronized, this field displays "Not Synchronized."
To specify an SNTP server, see "Configuring SNTP Settings" on page
Unified Wired and Wireless Access System
System Description
97.
Page 63