Figure 247: Mac Acl Rule Configuration (Permit Action); Table 215: Mac Acl Rule Configuration Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

shows the fields available when you create a rule for a MAC ACL.

shows all possible fields on the MAC ACL Rule Configuration page. The actual fields available on the

page depend on whether you create a new rule or modify an existing rule, and whether the rule action is

Permit or Deny.

Figure 247: MAC ACL Rule Configuration (Permit Action)

Specifies an existing MAC ACL. To set up a new MAC ACL use the

Control Lists"

Select an existing Rule ID to modify or select Create Rule to configure a new

ACL Rule. Enter a whole number in the range of 1 to 12 that will be used to

identify the rule. New rules cannot be created if the maximum number of

rules has been reached. For each rule, a packet must match all the specified

criteria in order to be true against that rule and for the specified rule action

(Permit/Deny) to take place.

This field is only available if you select Create Rule from the Rule field. Enter a

new Rule ID. After you click Submit, the new ID is created and you can

configure the rule settings. You can create up to 12 rules for each ACL.

Specify what action should be taken if a packet matches the rule's criteria:

• Permit: Forwards packets that meet the ACL criteria.

• Deny: Drops packets that meet the ACL criteria.

MAC Access Control Lists

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents