Viewing The Channel Plan History; Figure 370: Channel Plan History - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
Field
Power Adjustment
Mode
Power Threshold (dBm) You can set the Power Threshold to indicate Auto Power Algorithm to adjust every
Power Algorithm
Current Status
Command Buttons
The page includes the following button:
• Submit—Updates the switch with the values you enter. To retain the new values across a power cycle,
you must perform a save (Tools > Save Changes).

Viewing the Channel Plan History

The DWS-4000 Series switch stores channel assignment information for the APs it manages. To access the
Channel Plan History information, click the AP Management > RF Management > Channel Plan History tab.
The Cluster Controller switch that controls the cluster maintains the channel history information for all
switches in the cluster. On the Cluster Controller, the page shows information about the radios on all APs
managed by switches in the cluster that are eligible for channel assignment and were successfully assigned a
new channel.
Table 339 describes the Channel Plan History fields.
D-Link
Oct. 2015
Table 338: RF Channel Plan and Power Adjustment (Cont.)
Description
This field indicates the power adjustment mode. The mode of power adjustment can
be one of the following:
• Manual: In this mode, you run the proposed power adjustments manually from
the Manual Power Adjustments page.
• Auto: In this mode, the switch continually calculates the power adjustments and
applies the power for all APs. The interval period begins when you click Start in
Initiate the power plan algorithm field
APs power level, and make all the managed APs radio interference not more than
Power Threshold value each other.
Specifies the current status of AGA.

Figure 370: Channel Plan History

AP Management
Unified Wired and Wireless Access System
Page 579