Table 132: Spanning Tree Switch Configuration/Status Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Table 132: Spanning Tree Switch Configuration/Status Fields

Field
Spanning Tree Admin Mode
Force Protocol Version
Configuration Name
Configuration Revision Level Number used to identify the configuration currently being used. The values
Configuration Digest Key
MST ID
VID
FID
• If you make any configuration changes, click Submit to apply the new settings to the switch.
• Click Refresh to update the information on the screen with the most current data.
D-Link
Oct. 2015
Description
Enables or disables on the switch.
Specifies the Force Protocol Version parameter for the switch:
• IEEE 802.1D: Spanning Tree Protocol ()
• IEEE 802.1w: Rapid Spanning Tree Protocol (R)
• IEEE 802.1s: Multiple Spanning Tree Protocol (M)
Name used to identify the configuration currently being used. It may be up to
32 alphanumeric characters.
allowed are between 0 and 65535. The default value is 0.
Number used to identify the configuration currently being used. The digest
key is generated based on the association of VLANs to different instances. To
ensure the digest key is same on two different switches, the mapping of VLAN-
to-instance must be the same.
Table consisting of the MST instances (including the CST) and the
corresponding VLAN IDs associated with each of them.
This table consists of the VLAN identifier (VID) and the corresponding filtering
identifier (FID) associated with each VID.
Table consisting of the FIDs and the corresponding VLAN IDs associated with
each of them.
Configuring Spanning Tree Protocol
Unified Wired and Wireless Access System
Page 244