Wds Group Ap Status Summary; Figure 353: Wds Ap Group Status Summary; Table 321: Wds Ap Group Status Summary - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

WDS Group AP Status Summary

The WDS AP Group Status Summary page displays summary information about the APs in a configured WDS

The following table describes the fields on the WDS AP Group Status Summary page.

AP MAC Address

AP Connection Status

Satellite Mode

Root Path Cost

Ethernet Port State

Ethernet Port Mode

Ethernet Port Link State When the Ethernet port is enabled, this status reports the link state of the port.

Use the drop-down menu above the fields to select the group number that identifies

the configured WDS AP group.

Identifies the AP in the group by its MAC address

Indicates whether the AP is currently being managed by one of the switches in the

Indicates whether the AP is a satellite AP connected to the network via a WDS link or

a root AP connected to the network via a wired link.

Indicates whether this AP is the root of the spanning tree. If spanning tree is disabled

then the AP is always reported as Not Root.

Spanning Tree Path Cost to the root. The root AP always reports this value as 0. If

spanning tree is disabled the value is also 0.

When spanning tree is enabled on the APs in the WDS group this status parameter

reports the spanning tree status of the Ethernet port, which is one of the following:

• Disabled ( is disabled or Link is down)

• Forwarding

On satellite APs the Ethernet port can be manually disabled. On root APs the port is

always enabled.

Monitoring Status and Statistics

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents