D-Link UWS User Manual
Field
Multicast Router Expiry Time Enter the amount of time in seconds that a switch waits for a query to be
• If you make any changes to the page, click Submit to apply the new settings to the system.
• To disable the MLD Snooping admin mode on a VLAN, select the VLAN from the VLAN ID field and click
Delete.
Multicast Router Configuration
The switch can dynamically learn of an attached multicast router, or you can configure a switch port as a
multicast router interface. Use the MLD Snooping Multicast Router Configuration page to configure an
interface as a static multicast router interface.
To access the MLD Snooping Multicast Router Configuration page, click LAN > L2 Features> MLD Snooping >
Multicast Router Configuration in the navigation tree.
Table 119: MLD Snooping Multicast Router Configuration Fields
Field
Slot/Port
Multicast Router
• If you enable or disable multicast router configuration on an interface, click Submit to apply the new
settings to the switch.
D-Link
Oct. 2015
Table 118: MLD Snooping VLAN Configuration Fields (Cont.)
Description
received on an interface before the interface is removed from the list of
interfaces with multicast routers attached. The range is 0 to 3600 seconds. A
value of 0 indicates an infinite time-out; i.e., no expiration.
Figure 135: MLD Snooping Multicast Router Configuration
Description
Select the physical or LAG interface to display.
Set the multicast router status:
• Enabled: The port is a multicast router interface.
• Disabled: The port does not have multicast router configured.
Configuring MLD Snooping
Unified Wired and Wireless Access System
Page 230