Igmp Snooping Querier Vlan Configuration; Figure 128: Igmp Snooping Querier Vlan Configuration; Table 112: Igmp Snooping Querier Vlan Configuration Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
Table 111: IGMP Snooping Querier Configuration Fields (Cont.)
Field
Querier Expiry Interval
• If you configure an IGMP snooping querier, click Submit to apply the new settings to the switch.
• Click Refresh to re-display the page with the latest information from the switch.

IGMP Snooping Querier VLAN Configuration

Use this page to configure IGMP queriers for use with VLANs on the network.
To access this page, click LAN > L2 Features> IGMP Snooping Querier > IGMP Snooping Querier VLAN
Configuration in the navigation tree.

Table 112: IGMP Snooping Querier VLAN Configuration Fields

Field
VLAN ID
Querier Election Participate
Mode
Snooping Querier VLAN
Address
• If you configure a snooping querier for a VLAN, click Submit to apply the new settings.
• Click Refresh to re-display the page with the latest information from the switch.
D-Link
Oct. 2015
Description
Specify the time interval in seconds after which the last querier information is
removed. The Querier Expiry Interval must be a value in the range of 60 and
300. The default value is 60 seconds.

Figure 128: IGMP Snooping Querier VLAN Configuration

Description
Specifies VLAN ID for which the IGMP Snooping Querier is to be enabled.
Select New Entry to create a new VLAN ID for IGMP Snooping.
Enables or disables Querier Participate Mode. When this mode is disabled,
upon seeing another querier of same version in the VLAN, the snooping
querier moves to non-querier state.
When enabled, the snooping querier participates in querier election, in which
the least IP address operates as the querier in that VLAN. The other querier
moves to non-querier state.
Specifies the Snooping Querier Address to be used as source IP address in
periodic IGMP queries sent on the specified VLAN.
Configuring IGMP Snooping Queriers
Unified Wired and Wireless Access System
Page 223