D-Link DWL-8600AP User Manual page 427

D-Link UWS User Manual
Field
Authenticator PAE State
Backend Authentication State This field displays the current state of the backend authentication state
Quiet Period
Transmit Period
Guest VLAN ID
Guest VLAN Period (secs)
Supplicant Timeout
Server Timeout
D-Link
Oct. 2015
Table 251: Port Access Control Status Fields (Cont.)
Description
This field displays the current state of the authenticator PAE state machine.
Possible values are as follows:
• Initialize
• Disconnected
• Connecting
• Authenticating
• Authenticated
• Aborting
• Held
• ForceAuthorized
• ForceUnauthorized
machine. Possible values are as follows:
• Request
• Response
• Success
• Fail
• Timeout
• Initialize
• Idle
Displays the configured quiet period for the selected port. This quiet period is
the value, in seconds, of the timer used by the authenticator state machine on
this port to define periods of time in which it will not attempt to acquire a
supplicant. The quiet period is the period for which the authenticator does not
attempt to acquire a supplicant after a failed authentication exchange with
the supplicant. The quiet period is a number in the range of 0 and 65535.
Displays the configured transmit period for the selected port. The transmit
period is the value, in seconds, of the timer used by the authenticator state
machine on the specified port to determine when to send an EAPOL EAP
Request/Identity frame to the supplicant. The transmit period is a number in
the range of 1 and 65535.
Displays the Guest VLAN ID configured on the interface. The valid range is 0 to
3965.
Displays the Guest VLAN period for the selected port. The Guest VLAN period
is the value, in seconds, of the timer used by the Guest VLAN Authentication.
The value is in the range of 1 to 300.
Displays the configured supplicant timeout for the selected port. The
supplicant timeout is the value, in seconds, of the timer used by the
authenticator state machine on this port to timeout the supplicant. The
supplicant timeout is a value in the range of 1 and 65535.
Displays the configured server timeout for the selected port. The server
timeout is the value, in seconds, of the timer used by the authenticator on this
port to timeout the authentication server. The server timeout is a value in the
range of 1 and 65535.
Port Access Control
Unified Wired and Wireless Access System
Page 427