Arp Create; Figure 184: Arp Create; Table 167: Arp Create Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

ARP Create

Use the ARP Create page to add an entry to the Address Resolution Protocol table.
To display the page, click LAN > L3 Features > ARP > ARP Create in the navigation tree.
Field
IP Address
MAC Address
• After you enter an IP address and the associated MAC address, click Submit to apply the changes to the
system and create the entry in the ARP table.
D-Link
Oct. 2015

Figure 184: ARP Create

Table 167: ARP Create Fields

Description
Enter the IP address you want to add. It must be the IP address of a device on
a subnet attached to one of the switch's existing routing interfaces.
The unicast MAC address of the device. Enter the address as six two-digit
hexadecimal numbers separated by colons, for example 00:06:29:32:81:40.
Configuring ARP
Unified Wired and Wireless Access System
Page 289