D-Link UWS User Manual
IP ACL Rule Summary
Use the IP ACL Rule Summary page to view a summary of the IP ACLs that have been configured on the switch.
To access the page, click LAN > Monitoring > Access Control Lists > IP Access Control Lists > Summary.
MAC Access Control Lists
A MAC ACL consists of a set of rules which are matched sequentially against a packet. When a packet meets
the match criteria of a rule, the specified rule action (Permit/Deny) is taken and the additional rules are not
checked for a match. On this menu the interfaces to which an MAC ACL applies must be specified. Rules for
the MAC ACL are specified/created using the MAC ACL Rule Configuration menu.
To configure a MAC ACL:
1. Use the
"MAC ACL Configuration"
2. Use the
"MAC ACL Rule Configuration"
3. Use the
"ACL Interface Configuration"
D-Link
Oct. 2015
Figure 243: IP ACL Rule Summary
page to define the ACL type and assign an ID to it.
page to create rules for the ACL.
to assign the ACL by its ID number to a port or VLAN.
MAC Access Control Lists
Unified Wired and Wireless Access System
Page 364