D-Link DWL-8600AP User Manual page 273

D-Link UWS User Manual
Table 153: LLDP-MED Remote Device Information Fields (Cont.)
Field
Network Policy Information
Inventory
Location Information
Extended PoE
Extended PoE PSE
Extended PoE PD
• Click Refresh to update the page with the latest information from the router.
D-Link
Oct. 2015
Description
Specifies if network policy TLV is received in the LLDP frames on this port:
• Media Application Type: Specifies the application type. Types of
application types are unknown, voicesignaling, guestvoice,
guestvoicesignalling, softphonevoice, videoconferencing,
streammingvideo, vidoesignalling. Each application type that is received
has the VLAN ID, priority, DSCP, tagged bit status and unknown bit status.
A port may receive one or many such application types. If a network policy
TLV has been received on this port, only then would this information be
displayed.
• Vlan ID: Specifies the VLAN ID associated with a particular policy type.
• Priority: Specifies the priority associated with a particular policy type.
• DSCP: Specifies the DSCP associated with a particular policy type.
• Unknown Bit Status: Specifies the unknown bit associated with a
particular policy type.
• Tagged Bit Status: Specifies the tagged bit associated with a particular
policy type.
Specifies the inventory TLV is received in LLDP frames on this port:
• Hardware Revisions. Specifies hardware version of the remote device.
• Firmware Revisions. Specifies firmware version of the remote device.
• Software Revisions. Specifies software version of the remote device.
• Serial Number. Specifies serial number of the remote device.
• Manufacturer Name. Specifies manufacturer's name of the remote device.
• Model Name. Specifies model name of the remote device.
• Asset ID. Specifies asset ID of the remote device.
Specifies if location TLV is received in LLDP frames on this port.
• Sub Type: Specifies type of location information.
• Location Information: Specifies the location information as a string for
given type of location ID.
Specifies if remote device is a PoE device.
• Device Type. Specifies the remote device's PoE device type connected to
this port.
Specifies if extended PSE TLV is received in LLDP frame on this port:
• Available: Specifies the remote port's power sourcing equipment's (PSE)
power value in tenths of watts.
• Source: Specifies the remote port's PSE power source.
• Priority: Specifies the remote port's PSE power priority.
Specifies if extended PD TLV is received in LLDP frame on this port.
• Required: Specifies the remote port's power device power requirement.
• Source: Specifies the remote port's PD power source.
• Priority: Specifies the remote port's PD power priority.
Unified Wired and Wireless Access System
Managing LLDP
Page 273