D-Link UWS User Manual
Time Range Entry Configuration
Use this page to configure periodic and absolute time range entries and add them to named time ranges.
Note: The time range entries use the system time for the time periods in which they take effect.
Make sure you configure the SNTP server settings so that the SNTP client on the switch can obtain
the correct date and time from the server.
To access this page, click LAN > Administration > Time Range > Time Range Entry Configuration.
Field
Time Range Name
Time Range Entry
Time Range Entry ID
Time Range Entry Type.
D-Link
Oct. 2015
Figure 65: Time Range Entry Configuration
Table 57: Time Range Entry Configuration
Description
Select the name of the time range to which you want to add a time range
entry.
Select Create New Time Range Entry to add a new entry to a time range. To
view or delete an existing time range entry, select its ID from the menu.
When creating a new time range entry, assign a unique ID number from 1–10.
This field does not appear if the entry has already been configured.
Specifies whether the entry is periodic or absolute. A periodic entry occurs at
the same time every day or on one or more days of the week. An absolute
entry does not repeat.
Configuring Time Ranges
Unified Wired and Wireless Access System
Page 143