Ap Provisioning; Ap Provisioning Summary Status; Figure 377: Ap Provisioning Summary Status; Table 346: Ap Provisioning Summary Status - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

AP Provisioning

The AP Provisioning feature helps you add new APs to an existing switch cluster. With AP Provisioning, you can
configure the access points with parameters that are needed to connect to the wireless network.
Note: The AP Provisioning Summary and Detail pages display data only when the switch is configured
as the Cluster Controller.
Use AP Provisioning to connect devices to a network enabled for mutual authentication. If a network is not
enabled for mutual authentication then APs can be attached to the network by properly configuring the local
Valid AP database or RADIUS AP database and discovery options. The provisioning feature can optionally be
used on networks not enabled for mutual authentication to simplify AP attachment to the cluster.

AP Provisioning Summary Status

Use the AP Provisioning Summary Status page to view information about all provisioned APs.
The following table shows the fields available on the AP Provisioning Summary Status page.
Field
MAC Address
IP Address
Primary IP Address
Backup IP Address
New Primary IP Address
New Backup IP Address
D-Link
Oct. 2015

Figure 377: AP Provisioning Summary Status

Table 346: AP Provisioning Summary Status

Description
MAC address of the AP
IP Address of the AP.
The IP address of the primary provisioned switch as reported by the
AP.
The IP address of the backup provisioned switch as reported by the AP.
Enter the IP address of primary switch to which the AP should try to
connect.
Enter the IP address of switch to which the AP should try to connect if
it is unable to connect to the primary switch.
AP Management
Unified Wired and Wireless Access System
Page 590