Figure 391: Ap Profile Tspec Configuration; Table 358: Tspec Configuration - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
Caution! If you change any of the settings on the TSPEC Configuration page, the AP radios will restart
when this profile is applied.
The following table describes the fields on the Access Point Profile TSPEC Configuration page.
Field
Radio 1
Radio 2
TSPEC Mode
Voice ACM Mode
D-Link
Oct. 2015

Figure 391: AP Profile TSPEC Configuration

Table 358: TSPEC Configuration

Description
You configure the TSPEC settings for Radio 1 and Radio 2 separately. Use the radio
button to select the desired radio.
Enable or disable TSPEC operation on this radio.
Regulates mandatory admission control (ACM) for the voice access category. The
options are:
• Enabled—A station is required to send a TSPEC request for bandwidth to the AP
before sending or receiving a voice traffic stream. The AP responds with the
result of the request, which includes the allotted medium time if the TSPEC was
admitted.
• Disabled—A station can send and receive voice priority traffic without requiring
an admitted TSPEC; the AP ignores voice TSPEC requests from client stations.
Configuring Advanced Settings
Unified Wired and Wireless Access System
Page 625