Server Configuration; Figure 67: Dns Server Configuration; Table 59: Dns Server Configuration Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

• To create a new list of domain names, click Create. Then enter a name of the list and click submit. Repeat

this step to add multiple domains to the default domain list.

• To remove a domain from the default list select the Remove option next to the item you want to remove

and click Submit.

Server Configuration

Use this page to configure information about DNS servers that the router will use. The order in which you

create them determines their precedence; i.e., DNS requests will go to the higher precedence server first. If

that server is unavailable or does not respond in the configured response time, then the request goes to the

server with the next highest precedence.

To access this page, click LAN > Administration >DNS Client > Server Configuration.

DNS Server Address

• To create a new DNS server, enter an IP address in standard IPv4 or IPv6 dot notation in the DNS Server

Address and click Submit. The server appears in the list below. The precedence is set in the order created.

• To change precedence, you must remove the server(s) by clicking the Remove box and then Submit, and

add the server(s) in the preferred order.

To add a new DNS server to the list, enter the DNS server IPv4 or IPv6 address

in numeric notation.

Shows the precedence value of the server that determines which server is

contacted first; a lower number indicates has higher precedence.

Configuring DNS

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents