Bootp/Dhcp Relay Agent Configuration; Figure 177: Bootp/Dhcp Relay Agent Configuration; Table 160: Bootp/Dhcp Relay Agent Configuration Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

BootP/DHCP Relay Agent Configuration

Use the BOOTP/DHCP Relay Agent Configuration page to configure and display a BOOTP/DHCP relay agent.

To display the page, click LAN > L3 Features > BOOTP/DHCP Relay Agent > Configuration in the navigation

Maximum Hop Count

Minimum Wait Time (secs)

Circuit ID Option Mode

• If you make any changes to the page, click Submit to apply the changes to the system.

Enter the maximum number of hops a client request can take before being

Enter a time in seconds. This value is compared to the time stamp in the

client's request packets, which should represent the time since the client was

powered up. Packets are only forwarded when the time stamp exceeds the

minimum wait time.

Select Enable or Disable from the dropdown menu. If you select Enable, the

relay agent adds Option 82 header packets to the DHCP Request packets

before forwarding them to the server, and strips them off while forwarding

the responses to the client.

Managing the BOOTP/DHCP Relay Agent

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents