Table 74: Download File To Switch Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
Field
File Type
Image
Transfer Mode
TFTP Server Address Type
TFTP Server Address
TFTP File Path
D-Link
Oct. 2015

Table 74: Download File to Switch Fields

Description
Specify what type of file you want to download to the switch:
• CLI Banner: The CLI banner is the text that displays in the command-line
interface before the login prompt. The CLI banner to download is a text file
and displays when a user connects to the switch by using telnet, SSH, or a
serial connection.
• Code: The code is the system software image, which is saved in one of two
flash sectors called active image and backup image. The active image
stores the active copy; while the other image stores a second copy. The
device boots and runs from the active image. If the active image is corrupt,
the system automatically boots from the non-active image. This is a safety
feature for faults occurring during the boot upgrade process.
• Configuration: If you have a copy of a valid binary configuration file
(faath.cfg) on a TFTP server, you can download it to the switch.
• Text Configuration: A text-based configuration file enables you to edit a
configured text file (startup-config) offline as needed without having to
translate the contents for the D-Link software to understand. The most
common usage of text-based configuration is to upload a working
configuration from a device, edit it offline to personalize it for another
similar device (i.e., change the device name, serial number, IP address,
etc.), and download it to that device.
• SSH-1 RSA Key File: SSH-1 Rivest-Shamir-Adleman (RSA) Key File. To
download SSH key files, SSH must be administratively disabled and there
can be no active SSH sessions.
• SSH-2 RSA Key PEM File: SSH-2 Rivest-Shamir-Adleman (RSA) Key File
(PEM Encoded). To download SSH key files, SSH must be administratively
disabled and there can be no active SSH sessions.
• SSH-2 DSA Key PEM File: SSH-2 Digital Signature Algorithm (DSA) Key File
(PEM Encoded). To download SSH key files, SSH must be administratively
disabled and there can be no active SSH sessions.
• SSL Trusted Root Certificate PEM File: SSL Trusted Root Certificate File
(PEM Encoded).
• SSL Server Certificate PEM File: SSL Server Certificate File (PEM Encoded).
• SSL DH Weak Encryption Parameter PEM File: SSL Diffie-Hellman Weak
Encryption Parameter File (PEM Encoded).
• SSL DH Strong Encryption Parameter PEM File: SSL Diffie-Hellman Strong
Encryption Parameter File (PEM Encoded).
Specify the code image you want to download, either active or backup. This
field is only visible when Code is selected as the File Type. The factory default
is active.
Specifies the protocol to be used for the transfer: TFTP, SFTP, or SCP.
Specify either IPv4,IPv6, or DNS address to indicate the format of the TFTP
Server Address field. The factory default is IPv4.
Enter the IP address of the TFTP server in accordance with the format
indicated by the TFTP Server Address Type. The factory default is the IPv4
address 0.0.0.0.
Enter the path on the TFTP server where the selected file is located. You may
enter up to 32 characters. The factory default is blank.
Download File To Switch (TFTP)
Unified Wired and Wireless Access System
Page 172