D-Link DWL-8600AP User Manual page 519

D-Link UWS User Manual
Field
Authentication Status Indicates whether this client is authenticated.
Threat Detection
Threat Mitigation
Status
Time Since Entry Last
Updated
Time Since Entry Create Shows the amount of time that has passed since this entry was first added to the
Client Name
RSSI
Signal
Noise
Probe Req Recorded
Probe Collection
Interval
Highest Probes
Detected
Channel
OUI Description
Auth Msgs Recorded
Auth Collection Interval Shows the amount of time spent in each authentication collection period. The
Highest Auth Msgs
De-Auth Msgs
Recorded
De-Auth Collection
Interval
Highest De-Auth Msgs Shows the largest number of de-authentication messages that the switch detected
Authentication Failures Shows the number of 802.1X Authentication failures detected for this client.
Probes Detected
D-Link
Oct. 2015
Table 309: Detailed Detected Client Status (Cont.)
Description
Note: The Client Status can be Rogue, but the authentication status can still be
Authenticated.
Indicates whether one of the threat detection tests has been triggered for this client.
If the test is disabled, the client will not be marked as a rogue, but you can still
investigate why the threat was triggered.
Indicates whether threat mitigation has been done for this client.
Shows the amount of time that has passed since any event has been received for this
client that updated the detected client database entry.
detected clients database.
Shows the name of the client, if available, from the Known Client Database. If the
client is not in the database then the field is blank.
If the client is authenticated with the managed AP, this field displays the last RSSI
value reported by the AP with which the client is authenticated. The RSSI is a
percentage from 1–100%. A value of 0 means the AP is not detected.
Last signal strength reported by the managed AP with which the client is
authenticated. The possible range is –128 to 128 dBm.
Last channel noise reported by the managed AP with which the client is
authenticated. The possible range is –128 to 128 dBm.
Number of probe requests recorded so far during the probe collection interval.
Shows the amount of time spent in each probe collection period. The probe
collection helps the switch decide whether the client is a threat.
Shows the largest number of probes that the switch detected during a probe
collection interval.
Identifies the channel that the client is using.
The organization name associated with the detected client's Organizationally Unique
Identifier (OUI).
Shows the number of IEEE 802.11 Authentication messages recorded so far during
the authentication collection interval.
authentication collection helps the switch decide whether the client is a threat.
Shows the largest number of authentication messages that the switch detected
during an authentication collection interval.
Shows the number of IEEE 802.11 De-Authentication messages recorded so far
during the deauthentication collection interval.
Shows the amount of time spent in each de-authentication collection period. The
deauthentication collection helps the switch decide whether the client is a threat.
during a deauthentication collection interval.
Shows the number of probes detected in the last RF Scan.
Monitoring Status and Statistics
Unified Wired and Wireless Access System
Page 519