Ip Interface Configuration; Figure 188: Ip Interface Configuration; Table 172: Ip Interface Configuration Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

IP Interface Configuration

Use the IP Interface Configuration page to update IP interface data for this switch.

To display the page, click LAN > L3 Features > IP > Interface Configuration in the navigation tree.

Routing Interface Status

IP Address Configuration

Select the interface to configure from the dropdown menu. The dropdown

menu contains logical interfaces, including loopback interfaces and VLAN

routing interfaces.

Shows whether the IPv4 routing is up or down on the interface.

Specify whether the selected interface should receive an IP address

dynamically through DHCP, or statically through manual IP address

If you configure DHCP as the method, additional buttons display at the bottom

of the page that allow you to renew, release, or display DHCP-assigned

information.

If the configuration method is manual, enter the static IP address for the

If the configuration method is manual, enter the subnet mask for the

interface. This is also referred to as the subnet/network mask, and defines the

portion of the interface's IP address that is used to identify the attached

Configuring Global and Interface IP Settings

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents