Table 328: Radio Settings - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

The following table describes the fields you can configure from the Radio tab on the Basic Setup page. To

change the settings on this page, you must first select the radio you want to configure (1 or 2). After you

change the settings, click Submit to apply the settings. Changes to the settings apply only to the selected radio.

Table 328: Radio Settings

From this field, you can select the radio that you want to configure. By default, Radio

1 operates in IEEE 802.11a mode, and Radio 2 operates in IEEE 802.11b/g mode. If

you change the mode, the labels for the radios change accordingly. Changes to the

settings apply only to the selected radio.

The DWL-3600AP is a single-radio AP. Any settings you configure for Radio 1

(802.11a) are not applied to the DWL-3600AP. If the selected Hardware Type ID for

the AP profile is DWL-3600AP, the radio selectors are not available.

Specify whether you want the radio on or off by clicking On or Off.

If you turn off a radio, the AP sends disassociation frames to all the wireless clients it

is currently supporting so that the radio can be gracefully shutdown and the clients

can start the association process with other available APs.

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents