Vlan Status; Figure 133: Mld Snooping Vlan Status; Table 117: Mld Snooping Vlan Status Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points
Hide thumbs Also See for DWL-8600AP:
Table of Contents

Advertisement

D-Link UWS User Manual
Table 116: MLD Snooping Interface Configuration Fields (Cont.)
Field
Multicast Router Present
Expiration Time
Fast Leave Admin Mode
• If you make any changes on the page, click Submit to apply the new settings to the switch.

VLAN Status

Use the MLD Snooping VLAN Status page to view information about the VLANs on the system that are
configured for MLD snooping.
To access the MLD Snooping VLAN Status page, click Monitoring > MLD Snooping > VLAN Status in the
navigation tree.
Field
VLAN ID
Admin Mode
Fast Leave Admin Mode
Group Membership Interval
Maximum Response Time
Multicast Router Expiry Time Shows the amount of time to wait before removing an interface that is
• Click Refresh to re-display the page with the latest information from the router.
D-Link
Oct. 2015
Description
Specify the amount of time you want the switch to wait to receive a query on
an interface before removing it from the list of interfaces with multicast
routers attached. Enter a value between 0 and 3600 seconds. The default is 0
seconds. A value of zero indicates an infinite timeout; i.e., no expiration.
Select the Fast Leave mode for the a particular interface from the pulldown
menu. The default is Disable.

Figure 133: MLD Snooping VLAN Status

Table 117: MLD Snooping VLAN Status Fields

Description
Displays the VLAN IDs for which the MLD Snooping mode is Enabled.
Shows the MLD Snooping Mode for the VLAN ID.
Indicates whether MLD Snooping Fast-leave is active on the VLAN.
Shows the amount of time in seconds that a switch will wait for a report from
a particular group on a particular interface, which is participating in the VLAN,
before deleting the interface from the entry. The valid range is 2 to 3600.
Shows the amount of time the switch waits after it sends a query on an
interface, participating in the VLAN, because it did not receive a report for a
particular group on that interface. The valid range is 1 to 3599. Its value should
be greater than group membership interval value.
participating in the VLAN from the list of interfaces with multicast routers
attached. The interface is removed if a query is not received. The valid range
is 0 to 3600.
Configuring MLD Snooping
Unified Wired and Wireless Access System
Page 228

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents