Load Configuration Using Xmodem; Display Operational Code Vital Product Data - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Load Configuration Using XMODEM

Use option 5 when a new configuration file must be downloaded to replace the saved system configuration
file.
To download software from the Boot menu:
1. On the Boot menu, select 5 and press <Enter>.
The following prompt displays:
[Boot Menu] 4
Ready to receive the file with XMODEM/CRC....
Ready to RECEIVE File tempcfg.bin in binary mode
Send several Control-X characters to cancel before transfer starts.
2. When using HyperTerminal, click Transfer on the HyperTerminal menu bar.
3. From the Transfer menu, click Send File.
The Send File window displays.
4. Enter the file path for the file to be downloaded.
5. Make sure the protocol is defined as XMODEM.
6. Click Send.
The configuration file is downloaded. The terminal emulation application, such as HyperTerminal, may
display the loading process progress.

Display Operational Code Vital Product Data

Use option 6 to view boot image information.
To display boot image information from the Boot menu:
1. On the Boot menu, select 6 and press <Enter>.
The following prompt displays:
[Boot Menu] 6
The following image is in the Flash File System:
File Name......................................image1
CRC............................................0xb017 (45079)
Target Device..................................0x00508541
Size...........................................0x8ec50c (9356556)
Number of Components...........................2
Operational Code Size..........................0x7ec048 (8306760)
Operational Code Offset........................0x74 (116)
Operational Code FLASH flag....................1
Operational Code CRC...........................0x9B4D
Boot Code Version..............................1
Boot Code Size.................................0x100000 (1048576)
Boot Code Offset...............................0x7ec0bc (8306876)
Boot Code FLASH flag...........................0
Boot Code CRC..................................0x1CB8
VPD - rel 0 ver 31 maint_lvl 0
Timestamp - Thu Jun
File - pc62xxr0v31.stk[Boot Menu]
2. The bootup process resumes.
D-Link
Oct. 2015
8 12:51:44 2006
Booting the Switch
Unified Wired and Wireless Access System
Page 52