Configuring Users In A Remote Radius Server; Table 230: Captive Portal User Radius Attributes - D-Link DWL-8600AP User Manual

Dws-4000 series access points
Hide thumbs Also See for DWL-8600AP:
Table of Contents

Advertisement

D-Link UWS User Manual
Field
Description
Max Transmit
Enter the maximum number of bytes that the user is allowed to transmit when using the
captive portal. After this limit has been reached the user will be disconnected.
Max Total
Enter the maximum number of bytes the user is allowed to transfer (sum of bytes
transmitted and received). After this limit has been reached the user will be
disconnected.

Configuring Users in a Remote RADIUS Server

You can use a remote RADIUS server client authorization. You must add all users to the RADIUS server. The
local database in the DWS-4000 Series switch does not share any information with the remote RADIUS
database.
Table 230
indicates the RADIUS attributes you use to configure authorized captive portal clients. The table
indicates both RADIUS attributes and vendor-specific attributes (VSA). VSAs are denoted in the Attribute
column and are comma delimited (vendor id, attribute id).For each user entry in the RADIUS user database,
you can set maximum data transmission rates to control bandwidth usage. The timeouts and transmission
limits are configured on a per-user basis.
Attribute
Number
User-Name
1
User-Password
2
Session-Timeout
27
Idle-Timeout
28
WISPr-Bandwidth-
14122, 7
Max-Up
D-Link
Oct. 2015
Table 229: Local User Configuration (Cont.)

Table 230: Captive Portal User RADIUS Attributes

Description
User name to be authorized 1-32
User password
Logout once session timeout
is reached (seconds). If the
attribute is 0 or not present
then use the value
configured for the captive
portal.
Logout once idle timeout is
reached (seconds). If the
attribute is 0 or not present
then use the value
configured for the captive
portal.
Maximum client transmit
rate (b/s). Limits the
bandwidth at which the
client can send data into the
network. If the attribute is 0
or not present, then use the
value configured for the
captive portal.
Captive Portal Configuration
Range
Usage
Required
characters
8-64
Required
characters
Integer
Optional
(seconds)
Integer
Optional
(seconds)
Integer
Optional
Unified Wired and Wireless Access System
Default
None
None
0
0
Page 398

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents