Interface Configuration; Figure 72: Isdp Interface Configuration; Table 64: Isdp Interface Configuration - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

Protocol Version

Last Time Changed

Interface Configuration

From the ISDP Interface Configuration page, you can configure the ISDP settings for each interface. To display

the ISDP Cache Table page, click LAN > Administration > ISDP > Interface Configuration in the navigation tree.

Note: If ISDP is enabled on an interface, it must also be enabled globally in order for the interface to

transmit ISDP packets. If the ISDP mode on the ISDP Global Configuration page is disabled, the

interface will not transmit ISDP packets, regardless of the mode configured on the interface.

The following table describes the fields available on the ISDP Interface Configuration page.

Table 63: ISDP Cache Table (Cont.)

Displays the ISDP holdtime for the neighbor.

Displays the ISDP Functional Capabilities for the neighbor.

Displays the ISDP Hardware Platform for the neighbor.

Displays the ISDP port ID string for the neighbor.

Displays the ISDP Protocol Version for the neighbor.

Displays when entry was last modified.

Select the interface with the ISDP mode status to configure or view.

Use this field to enable or disable the Industry Standard Discovery Protocol on

the selected interface.

Configuring and Viewing ISDP Information

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents